The Programme Content

AC Motors

• Discussion - Goals
• Introduction to magnetics, excitation and the generation of back emf.
• Fundamentals of rotating machines theory, AC motors and their construction, rotor slip and principles of operation, equivalent circuit, torque-speed characteristics, motoring and regenerative region of operation, efficiency, inertia, horsepower, power factor.
• Single-phase and three-phase AC motors, types of single-phase motors, split-phase and capacitor.
• Starting of induction motors and associated techniques, accelerating.
• Speed control requirements of AC motors and load matching.

Drives

• Basic principles of AC Variable-Speed Drives (VSD`s), constant torque region, constant power (extended speed) region, four quadrant operation.
• Power semiconductors, diode, thyristor (SCR), IGBT, MOSFET, GTO and others.
• Inverters, voltage-source and current-source, pulse width modulated (PWM) inverters.
• Two-level pulse width modulated inverter, DC link energy and capacitor sizing, regeneration or dynamic slowdown, dynamic breaking, regeneration.
• PWM waveforms and analysis, effects of PWM on motor bearings and insulation and life expectancy, volts/Hertz control, start up and operation, dynamics, PWM rectifier inverter systems.
• Switching transients, harmonics and power factor.
• AC drive line power factor, effect of AC input on drive operation, switching transients, insulation voltage stress, motor winding voltage distribution, radiated and conducted electromagnetic interferences (EMI), EMI filtering.

Troubleshooting and Maintenance of Motors

• Characteristics of motors, enclosures and cooling methods, application data, design characteristics, insulation of AC motors.
• Failures in three-phase stator windings, predictive maintenance, motor troubleshooting, diagnostic testing for motors.
• Troubleshooting and maintenance of AC motors, routine care, dirt and corrosion, lubrication, heat, noise and vibration, insulation.
• Slow acceleration or refusal to starting of an AC motor, overheating and noise making of the motor, running of bearings at high temperature or making noise.
• Standards and testing.

Troubleshooting and Maintenance of Drives

• Converter failures, common failure modes, fault current limit, device explosion rating, device application, thyristor failures and testing, identification of failed thyristor and diode, testing of thyristor and diode.
• Reversing circuits for single-phase and three-phase AC motors, finding open and short-circuit, detection of AC motor symptoms.
• Preventative maintenance, approaches, guidelines and scheduling, checking, dynamic and static inspections, detecting phase unbalances, loss of phases, and phase reversal.

Protection of Motors and Drives

• Protection of AC motors, requirements, overload protection, currents during starting and stalled point, operation of motors under three-phase unbalanced power supply, motor de-rating due to unbalanced currents, stator and rotor protection, single-phase over-current relays, phase unbalance relays, faults in stator and rotor windings, earth faults, phase-to-phase faults, modern relay design and applications, protection targeting AC synchronous motors, over-voltage and under-frequency protection.
• Fuses, circuit breakers, magnetic and thermal, overload, eutectic, bimetal and solid-state, others.
• Motor protection curves, back-up protection.
• Protection of inverters and electronic converters driving motors.
• Case studies, selection and design of systems and their protection.
• Seminar summary.

The Scandinavian Academy for Training and Development employs modern methods in training and skills development, enhancing the efficiency of human resource development. We follow these practices:

• Theoretical Lectures: 
  • We deliver knowledge through advanced presentations such as PowerPoint and visual materials, including videos and short films.
• Scientific Assessment:
  • We evaluate trainees skills before and after the course to ensure their progress.
• Brainstorming and Interaction: 
  • We encourage active participation through brainstorming sessions and applying concepts through role play.
• Practical Cases:
  • We provide practical cases that align with the scientific content and the participants specific needs.
• Examinations: 
  • Tests are conducted at the end of the program to assess knowledge retention.
• Educational Materials:
  • We provide both printed and digital scientific and practical materials to participants.
• Attendance and Final Result Reports:
  • We prepare detailed attendance reports for participants and offer a comprehensive program evaluation.
• Professionals and Experts: 
  • The programs scientific content is prepared by the best professors and trainers in various fields.
• Professional Completion Certificate: 
  • Participants receive a professional completion certificate issued by the Scandinavian Academy for Training and Development in the Kingdom of Sweden, with the option for international authentication.
• Program Timings:
  • Training programs are held from 10:00 AM to 2:00 PM and include buffet sessions for light meals during lectures.

The Course

AC motors represent industry`s workhorse in small, medium and large size applications. It is no exaggeration to suggest that more than 50% of the energy consumed worldwide is converted by AC motors into work and these motors are controlled by drives. These drives are ever increasing more intelligent, electrical and their monitoring and operation can be integrated with the plant`s SCADA system. Understanding maintenance and troubleshooting procedures of such vital industrial equipment means that reduced downtime and increased productivity are the immediate benefits for the company and its management. Equally important, the protection requirements along with their function and integration with the overall system ensures that such expensive apparatus, requiring high capital investment, is well guarded against failures further offering safety for operations personnel as well. The seminar addresses the three topics mentioned above for both AC motors and their drives.

The Goals

The objectives of the seminar are:

• To present the operation and construction of AC electrical motors and the electrical drives based on modern state-of-the-art inverter technology, and their characteristics that need to be matched with those of loads.
• To discuss maintenance procedures both for motors and drives following well-established industrial procedures as outlined in standards.
• To familiarize with troubleshooting methods for both motors and drives following methodologies that have been developed by manufacturers in order to reduce downturn time dramatically.
• To become familiar on how to utilize single-line drawings and other documentation to successful perform commissioning, maintenance and troubleshooting.
• To analyse case studies and learn from such experience.

The Process

The latest educational methods and strategies will be employed. The seminar is designed to maximize delegate benefit from the outset and any specific goals of each participant will be discussed to ensure needs are fulfilled as far as possible. Questions are encouraged throughout the day and at the daily wrap-up sessions. This provides opportunities for participants to discuss with the presenter and other delegates specific problems and appropriate solutions. All delegates take away a detailed and comprehensive copy of the material presented; therefore minimal note taking is encouraged to ensure maximum participation and attention.

The Benefits

At the end of the seminar, each delegate will:

• Understand the operation and construction of AC electrical motors and the electrical drives based on modern electronics technology.
• Be able to explain their characteristics and the need to match various load needs.
• Become more confident on how to maintain both motors and drives following well-established industrial procedures as outlined in standards.
• Become familiar with troubleshooting methods for both motors and drives following methodologies that have been developed by manufacturers in order to reduce downturn time dramatically.
• Learn how to utilize single-line drawings, and other documentation to successfully perform commissioning, maintenance and troubleshooting of both motors and drives.
• Become exposed to industrial standards and case studies so that to be able to apply this knowledge in the industrial plant as quickly and efficiently as possible.

The Results

In many onshore and offshore industrial and commercial plants, automation of any process and associated control relies heavily on motors and their drives. The technical skills of engineers and technical managers as far as the operation, maintenance and troubleshooting of such important industrial equipment are vital for the efficient and cost effective operation of the plant with minimum downturn. These skills, as technology makes ever fast advancements need to be acquired and employees need training on the latest technologies and methods of motor drives and control in order to offer best solutions for the enterprise. Maintenance and operation of the plants on an efficient and reliable manner rely on strong skills of employees. The seminar addresses the fundamental topic of the key technology associated with the factory automation, i.e., motors and variable speed drives.

The Core Competencies

At the end of the seminar, the delegates will have confidence and fully understand how the motors are designed and controlled using the latest technology of electric drives. Exposure to industrial standards and industrial state-of-the-art computer software used for commissioning, testing, and operation of these systems is also provided, giving the delegates the necessary knowledge and experience to make improvements in their own work practice should these are needed.