Training Center
Training Course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

Course: Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

Download the course schedule plan in Excel Download the course schedule plan in PDF

Course: Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

Category

Petroleum, Oil & Gas Training Courses

Code

OG-508
Language English

City

Kuwait (Kuwait)

Hotel

Hotel Meeting Room

Duration

One week 25Hour
2025-10-12 2025-10-16

Fees

3950 €
Durations for this Course
Register for this course
Overeview Course Outline Training Methodology Course Location

Introduction

Appropriate material selection is the cornerstone of pressure equipment and piping design, operation and maintenance. Engineers must select materials of construction that provide adequate strength at operating temperatures and pressures, in compliance with applicable construction codes and with regard to their resistance to corrosion and other likely degradation mechanisms, as well as to cost-effectiveness. The acceptability of materials is controlled by the relevant Codes. The ultimate selection of the correct material is the responsibility of the design or fabrication engineer. By listing the design’s allowable stresses, the Codes do limit the materials that can be chosen. Only those materials that meet certain requirements as listed in the specifications should be used. The mechanical integrity, safety, and cost-effective operation of plants depend on the in-service performance of the materials of construction throughout the plant life cycle.

Metallurgy is a complex science but a general understanding of the major principles is essential to the plant engineers and inspectors This course provides comprehensive and practical understanding of engineering materials and guidance on the methods and best industry practices for the selection of the appropriate materials of construction for specific applications while simultaneously satisfying service requirements, construction Code requirements, and least life cycle costs over the entire plant life.

This course will provide a practical overview of ASME BPVC Section II – Materials, as well as some relevant information from the BPVC Section VIII Div.1 and B31.3 Process Piping

This course provides comprehensive and practical understanding of engineering materials and guidance on the methods and best industry practices for the selection of the appropriate materials of construction for specific applications while simultaneously satisfying service requirements, construction Code requirements, and least life cycle costs over the entire plant life. This course will provide a practical overview of ASME BPVC Section II – Materials, as well as some relevant information from the BPVC Section VIII Div.1 and B31.3 Process Piping

This course builds on a focused and practical coverage of engineering materials properties and selection and provides a structured approach to predict, monitor and assess the materials performance in service with the objective of ensuring plant integrity, safety and cost-effective operation

Seminar Objectives

The key objectives of this course are as follows:

  • Assist participants to clearly understand that the appropriate selection of materials of construction for pressure equipment is the cornerstone of safe, reliable and costeffective plant operation.
  • Enhance participants’ awareness of key requirements of relevant design and operation standards and industry practices such as ASME B&PVC and B31.3; ASTM Material Specifications, API 571, 580, 581, 578 and 579, and others.
  • Provide guidelines to participants to identify and locate in-service degradation and appropriate tools for condition assessment and making sound run/repair/replace decisions. Make participants recognize that although all flaws detected by inspection must be evaluated, not all flaws need to be repaired. The proper application of API Std 579-1/ASME FFS-1 for fitness-for-service assessment may obviate the need for some repairs and result in reduced maintenance cost and downtime

Who Should Attend?

This course is particularly valuable for refinery, petrochemical and process plant mechanical and process engineers, technical professionals, inspectors, maintenance personnel, as well as for project and consulting engineers and engineering and technical personnel involved in plant mechanical integrity and reliability.

Organisational Impact

  • The company will achieve improved financial performance through the proper selection of materials of construction based on total life cycle cost principles.
  • The company will be able to achieve measurable improvement in mechanical integrity through improved materials performance and reduced likelihood of failures.
  • The company will be able to enhance its ability to use risk-based inspection and maintenance resulting in lower life cycle costs while complying with codes and standards, and other regulatory requirement.

Personal Impact

  • Participants will be more able to actively contribute towards reducing the probability of serious failures in pressure equipment and piping systems.
  • Participants will enhance their competence and productivity thereby enhancing their competence and performance level and making additional value added contributions to their organizations.

Competencies Emphasized

Delegates will enhance their competencies in the following areas:

  • Engineering materials properties and selection criteria for specific applications with view to achieving optimum life cycle costs while complying with codes and regulations.
  • Construction codes, standards and recommended practices covering design of pressure equipment and piping systems.
  • Identification and assessment of active degradation mechanisms and the failures they may cause.
  • Hazard identification and risk analysis and management.
  • Application of risk-based methodologies in inspection and maintenance.
  • Fitness-For-Services assessments.

Training Methodology

The course combines sound engineering principles, methods, and applicable codes & standards and best industry practices. Actual major incidents as well as industry experience will be reviewed in depth to reinforce every topic.

Copy course link
Send me course brochure
Download course brochure
Re-call me
Course inquire
Tailored course
Send to friend
Group offer
Print
Register for this course

Another durations and cities for the same course

Courses Filter

City

DUBAI (UAE)
Kuala Lumpur (Malaysia)
Amman (Jordan)
Jakarta (Indonesia)
Sharm ElShaikh (Egypt)
Amsterdam (Netherlands)
Casablanca (Morocco)
Paris (France)
Istanbul (Turkey)
Singapore (Singapore)
Manama (Bahrain)
Washington (US)
Beirut (Lebanon)
Barcelona (Spain)
Kuwait (Kuwait)
Budapest (Hungary)
Athens (Greece)
Copenhagen (Denmark)
Berlin (Germany)
Brussels (Belgium)
Bucharest (Romania)
Zurich (Switzerland)
Hamburg (Germany)
Marrakesh (Morocco)
Beijing (China)
Doha (Qatar)
Bangkok (Thailand)
Muscat (Oman)
Toronto (Canada)
Cyprus (Larnaka)
Cairo (Egypt)
Madrid (Spain)
London (UK)
Stockholm (Sweden)
Geneva (Switzerland)
Vienna (Austria)
Munich (Germany)
Prague (Czech Republic)
Rome (Italy)
Hong Kong
Dublin (Ireland)
Auckland (New Zealand)
Trabzon (Turkey)
Florence (Italy)
Tunisia
Marbella (Spain)
New York (US)
Tbilisi (Georgia)
Frankfurt (Germany)
Malaga (Spain)
Yerevan (Armenia)
Baku (Azerbaijan)
Zagreb (Croatia)
ONLINE
Hurghada (Egypt)
Warsaw (Poland)
Results --->  Of Courses
58

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2024-12-09 2024-12-13
Class Room 4450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Jakarta (Indonesia) Jakarta-(Indonesia)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2024-12-16 2024-12-20
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Copenhagen (Denmark) Copenhagen-(Denmark)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2024-12-22 2024-12-26
Class Room 3450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Amman (Jordan) Amman-(Jordan)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-01-05 2025-01-09
Class Room 3450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Sharm ElShaikh (Egypt) Sharm-ElShaikh-(Egypt)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-01-13 2025-01-17
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Frankfurt (Germany) Frankfurt-(Germany)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-01-13 2025-01-17
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Malaga (Spain) Malaga-(Spain)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-01-27 2025-01-31
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Rome (Italy) Rome-(Italy)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-01-27 2025-01-31
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Paris (France) Paris-(France)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-02-09 2025-02-13
Class Room 3450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Manama (Bahrain) Manama-(Bahrain)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-02-10 2025-02-14
Class Room 3950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of DUBAI (UAE) DUBAI-(UAE)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-02-10 2025-02-14
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Amsterdam (Netherlands) Amsterdam-(Netherlands)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-02-17 2025-02-21
Online 2250 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of ONLINE ONLINE

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-02-24 2025-03-28
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Hamburg (Germany) Hamburg-(Germany)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-03-10 2025-03-14
Class Room 5450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Budapest (Hungary) Budapest-(Hungary)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-03-17 2025-03-21
Class Room 5450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Warsaw (Poland) Warsaw-(Poland)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-03-24 2025-03-28
Class Room 5450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Yerevan (Armenia) Yerevan-(Armenia)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-04-07 2025-04-11
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Auckland (New Zealand) Auckland-(New-Zealand)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-04-14 2025-04-18
Class Room 3450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Istanbul (Turkey) Istanbul-(Turkey)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-04-28 2025-05-02
Class Room 5450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Baku (Azerbaijan) Baku-(Azerbaijan)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-05-11 2025-05-15
Class Room 3450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Hurghada (Egypt) Hurghada-(Egypt)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-05-12 2025-05-16
Class Room 6450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Singapore (Singapore) Singapore-(Singapore)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-05-19 2025-05-23
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Geneva (Switzerland) Geneva-(Switzerland)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-05-19 2025-05-23
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Berlin (Germany) Berlin-(Germany)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-06-09 2025-06-13
Class Room 5450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Bangkok (Thailand) Bangkok-(Thailand)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-06-16 2025-06-20
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Athens (Greece) Athens-(Greece)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-06-30 2025-07-04
Class Room 3450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Istanbul (Turkey) Istanbul-(Turkey)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-06-30 2025-07-04
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Madrid (Spain) Madrid-(Spain)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-07-06 2025-07-10
Class Room 3050 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Beirut (Lebanon) Beirut-(Lebanon)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-07-21 2025-07-25
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Stockholm (Sweden) Stockholm-(Sweden)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-07-28 2025-08-01
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Prague (Czech Republic) Prague-(Czech-Republic)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-08-10 2025-08-14
Class Room 3950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Marrakesh (Morocco) Marrakesh-(Morocco)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-08-11 2025-08-15
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Munich (Germany) Munich-(Germany)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-08-11 2025-08-15
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Barcelona (Spain) Barcelona-(Spain)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-08-25 2025-08-29
Class Room 5450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Zagreb (Croatia) Zagreb-(Croatia)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-08-31 2025-09-04
Class Room 3950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Doha (Qatar) Doha-(Qatar)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-09-01 2025-09-05
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Zurich (Switzerland) Zurich-(Switzerland)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-09-01 2025-09-05
Class Room 4950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Trabzon (Turkey) Trabzon-(Turkey)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-09-08 2025-09-12
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Zurich (Switzerland) Zurich-(Switzerland)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-09-08 2025-09-12
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Marbella (Spain) Marbella-(Spain)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-09-22 2025-09-26
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Vienna (Austria) Vienna-(Austria)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-09-22 2025-09-26
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Cyprus (Larnaka) Cyprus-(Larnaka)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-09-22 2025-09-26
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Dublin (Ireland) Dublin-(Ireland)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-09-22 2025-09-26
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Florence (Italy) Florence-(Italy)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-09-29 2025-10-03
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Hong Kong Hong-Kong

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-10-05 2025-10-09
Class Room 3950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Muscat (Oman) Muscat-(Oman)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-10-06 2025-10-10
Class Room 6450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Singapore (Singapore) Singapore-(Singapore)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-10-12 2025-10-16
Class Room 3950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Kuwait (Kuwait) Kuwait-(Kuwait)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-10-19 2025-10-23
Class Room 3050 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Cairo (Egypt) Cairo-(Egypt)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-10-20 2025-10-24
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of London (UK) London-(UK)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-10-27 2025-10-31
Class Room 5450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Tbilisi (Georgia) Tbilisi-(Georgia)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-11-03 2025-11-07
Class Room 4950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Kuala Lumpur (Malaysia) Kuala-Lumpur-(Malaysia)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-11-09 2025-11-13
Class Room 3950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Casablanca (Morocco) Casablanca-(Morocco)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-11-10 2025-11-14
Class Room 5450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Bucharest (Romania) Bucharest-(Romania)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-11-10 2025-11-14
Class Room 3950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Tunisia Tunisia

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-12-01 2025-12-05
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Brussels (Belgium) Brussels-(Belgium)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-12-08 2025-12-12
Class Room 4450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Jakarta (Indonesia) Jakarta-(Indonesia)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-12-15 2025-12-19
Class Room 5950 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Copenhagen (Denmark) Copenhagen-(Denmark)

Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance

2025-12-21 2025-12-25
Class Room 3450 €
training course in Materials of Construction for Process Equipment & Piping Systems “ Selection and In_Service Performance held in in the city of Amman (Jordan) Amman-(Jordan)

Other courses from the same category

Registration Form

Inquiry Form

A tailored course application form

Brochure Request Form

Send to a Friend

Sample contact me back

Group Offer Form

Training Institute

Scandinavian Academy for Training and Development AB

Training services provider in the Kingdom of Sweden
Registration number :  559173 - 7431

VAT No : SE559173743101
LEI : 894500PURESQ3KN5AJ74

Copyright © 2024- All Rights Reserved to the Scandinavian Academy for Training and Development AB