Training Center
Training Course in Fundamentals of Mechanical Technology

Course: Fundamentals of Mechanical Technology

Download the course schedule plan in Excel Download the course schedule plan in PDF

Course: Fundamentals of Mechanical Technology

Category

Chemical, Mechanical Engineering Training Courses

Code

CM-119
Language English

City

Geneva (Switzerland)

Hotel

Hotel Meeting Room

Duration

One week 25Hour
2025-09-15 2025-09-19

Fees

5950 €
Durations for this Course
Register for this course
Overeview Course Outline Training Methodology Course Location

INTRODUCTION

Chemical engineering is at the heart of much of the chemical, oil, gas, and petrochemical industries. The chemical engineer is interested in the transportation and transformation of solids, liquids and gases, but must also be familiar with many of the other engineering disciplines including mechanical, electrical and instrumentation. Of specific importance are separation processes including distillation, heat transfer, hydraulics and fluid flow, reaction engineering, but also process control and economics. These are the fundamental principles of chemical engineering.

This programme considers the areas of chemical engineering that are most commonly encountered, and will provide an understanding of the fundamentals to the non-specialist, and a refresher to practising engineers, with examples that will be drawn from a range of process industries including oil and gas processing, petrochemicals, chemical manufacturing . 

In this programme you will:

  • Learn to interpret flowsheets and process flow diagrams
  • Develop and understand mass and energy balances in process design
  • Learn about fluid flow, pumps and compressors, and mixing
  • Discuss heat transfer equipment and their design, including heat exchangers
  • Understand distillation and separations used in oil and gas processing
  • Discuss effluent minimisation and treatment
  • Learn how to control processes
  • Perform a basic economic analysis of a project
  • Understand the safety and environmental responsibility on process engineers

PROGRAMME OBJECTIVES

Using case studies from the oil, gas and chemical industry to illustrate the material, participants attending the programme will:

  • Learn to interpret flowsheets and process flow diagrams
  • Understand the use of mass and energy balances in process design
  • Gain a basic understanding of fluid flow, including pumping and mixing
  • Study examples relevant to the oil and gas industry
  • Design a heat exchanger and know advantages/disadvantages of different types
  • Understand distillation and separations used in oil and gas processing
  • Appreciate the need to control environmental pollution from industry
  • Learn how to control processes
  • Perform a basic economic analysis of a project

TRAINING METHODOLOGY

In addition to formal lectures. videos and discussions, the participants will learn by active participation through the use of problem-solving exercises, group discussions and analysis of real-life case studies.

PROGRAMME SUMMARY

This programme identifies the areas of chemical engineering that are most commonly encountered and are fundamental to its understanding, enhancing process design and operation and enabling fruitful dialogue between the non-specialist and the engineer. Programme examples will be drawn from a range of process industries including the oil and gas processing, petrochemicals and chemical manufacturing industries.

Copy course link
Send me course brochure
Download course brochure
Re-call me
Course inquire
Tailored course
Send to friend
Group offer
Print
Register for this course

Another durations and cities for the same course

Courses Filter

City

DUBAI (UAE)
Kuala Lumpur (Malaysia)
Amman (Jordan)
Jakarta (Indonesia)
Sharm ElShaikh (Egypt)
Amsterdam (Netherlands)
Casablanca (Morocco)
Paris (France)
Istanbul (Turkey)
Singapore (Singapore)
Manama (Bahrain)
Washington (US)
Beirut (Lebanon)
Barcelona (Spain)
Kuwait (Kuwait)
Budapest (Hungary)
Athens (Greece)
Copenhagen (Denmark)
Berlin (Germany)
Brussels (Belgium)
Bucharest (Romania)
Zurich (Switzerland)
Hamburg (Germany)
Marrakesh (Morocco)
Beijing (China)
Doha (Qatar)
Bangkok (Thailand)
Muscat (Oman)
Toronto (Canada)
Cyprus (Larnaka)
Cairo (Egypt)
Madrid (Spain)
London (UK)
Stockholm (Sweden)
Geneva (Switzerland)
Vienna (Austria)
Munich (Germany)
Prague (Czech Republic)
Rome (Italy)
Hong Kong
Dublin (Ireland)
Auckland (New Zealand)
Trabzon (Turkey)
Florence (Italy)
Tunisia
Marbella (Spain)
New York (US)
Tbilisi (Georgia)
Frankfurt (Germany)
Malaga (Spain)
Yerevan (Armenia)
Baku (Azerbaijan)
Zagreb (Croatia)
ONLINE
Hurghada (Egypt)
Warsaw (Poland)
Results --->  Of Courses
65

Fundamentals of Mechanical Technology

2024-11-24 2024-11-28
Class Room 3950 €
training course in Fundamentals of Mechanical Technology held in in the city of Muscat (Oman) Muscat-(Oman)

Fundamentals of Mechanical Technology

2024-11-24 2024-11-28
Class Room 3950 €
training course in Fundamentals of Mechanical Technology held in in the city of Casablanca (Morocco) Casablanca-(Morocco)

Fundamentals of Mechanical Technology

2024-12-09 2024-12-13
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Hamburg (Germany) Hamburg-(Germany)

Fundamentals of Mechanical Technology

2024-12-16 2024-12-20
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of London (UK) London-(UK)

Fundamentals of Mechanical Technology

2024-12-23 2024-12-27
Class Room 4950 €
training course in Fundamentals of Mechanical Technology held in in the city of Trabzon (Turkey) Trabzon-(Turkey)

Fundamentals of Mechanical Technology

2024-12-23 2024-12-27
Online 2250 €
training course in Fundamentals of Mechanical Technology held in in the city of ONLINE ONLINE

Fundamentals of Mechanical Technology

2024-12-23 2024-12-27
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Malaga (Spain) Malaga-(Spain)

Fundamentals of Mechanical Technology

2024-12-30 2025-01-03
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Cyprus (Larnaka) Cyprus-(Larnaka)

Fundamentals of Mechanical Technology

2024-12-30 2025-01-03
Class Room 4450 €
training course in Fundamentals of Mechanical Technology held in in the city of Jakarta (Indonesia) Jakarta-(Indonesia)

Fundamentals of Mechanical Technology

2025-01-06 2025-01-10
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Paris (France) Paris-(France)

Fundamentals of Mechanical Technology

2025-01-06 2025-01-10
Class Room 3450 €
training course in Fundamentals of Mechanical Technology held in in the city of Istanbul (Turkey) Istanbul-(Turkey)

Fundamentals of Mechanical Technology

2025-01-13 2025-01-17
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Paris (France) Paris-(France)

Fundamentals of Mechanical Technology

2025-01-13 2025-01-17
Class Room 4950 €
training course in Fundamentals of Mechanical Technology held in in the city of Kuala Lumpur (Malaysia) Kuala-Lumpur-(Malaysia)

Fundamentals of Mechanical Technology

2025-01-20 2025-01-24
Class Room 5450 €
training course in Fundamentals of Mechanical Technology held in in the city of Budapest (Hungary) Budapest-(Hungary)

Fundamentals of Mechanical Technology

2025-01-20 2025-01-24
Class Room 5450 €
training course in Fundamentals of Mechanical Technology held in in the city of Baku (Azerbaijan) Baku-(Azerbaijan)

Fundamentals of Mechanical Technology

2025-02-10 2025-02-14
Class Room 5450 €
training course in Fundamentals of Mechanical Technology held in in the city of Zagreb (Croatia) Zagreb-(Croatia)

Fundamentals of Mechanical Technology

2025-02-23 2025-02-27
Class Room 3950 €
training course in Fundamentals of Mechanical Technology held in in the city of Marrakesh (Morocco) Marrakesh-(Morocco)

Fundamentals of Mechanical Technology

2025-02-24 2025-03-28
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Prague (Czech Republic) Prague-(Czech-Republic)

Fundamentals of Mechanical Technology

2025-02-24 2025-03-28
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Rome (Italy) Rome-(Italy)

Fundamentals of Mechanical Technology

2025-03-03 2025-03-07
Class Room 5450 €
training course in Fundamentals of Mechanical Technology held in in the city of Tbilisi (Georgia) Tbilisi-(Georgia)

Fundamentals of Mechanical Technology

2025-03-03 2025-03-07
Class Room 3950 €
training course in Fundamentals of Mechanical Technology held in in the city of Tunisia Tunisia

Fundamentals of Mechanical Technology

2025-03-10 2025-03-14
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Stockholm (Sweden) Stockholm-(Sweden)

Fundamentals of Mechanical Technology

2025-03-16 2025-03-20
Class Room 3450 €
training course in Fundamentals of Mechanical Technology held in in the city of Amman (Jordan) Amman-(Jordan)

Fundamentals of Mechanical Technology

2025-03-31 2025-04-04
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Munich (Germany) Munich-(Germany)

Fundamentals of Mechanical Technology

2025-04-07 2025-04-11
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Athens (Greece) Athens-(Greece)

Fundamentals of Mechanical Technology

2025-04-13 2025-04-17
Class Room 3050 €
training course in Fundamentals of Mechanical Technology held in in the city of Beirut (Lebanon) Beirut-(Lebanon)

Fundamentals of Mechanical Technology

2025-04-14 2025-04-18
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Brussels (Belgium) Brussels-(Belgium)

Fundamentals of Mechanical Technology

2025-04-14 2025-04-18
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Hong Kong Hong-Kong

Fundamentals of Mechanical Technology

2025-04-21 2025-04-25
Class Room 3450 €
training course in Fundamentals of Mechanical Technology held in in the city of Istanbul (Turkey) Istanbul-(Turkey)

Fundamentals of Mechanical Technology

2025-04-27 2025-05-01
Class Room 3450 €
training course in Fundamentals of Mechanical Technology held in in the city of Hurghada (Egypt) Hurghada-(Egypt)

Fundamentals of Mechanical Technology

2025-05-19 2025-05-23
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of London (UK) London-(UK)

Fundamentals of Mechanical Technology

2025-05-26 2025-05-30
Class Room 5450 €
training course in Fundamentals of Mechanical Technology held in in the city of Warsaw (Poland) Warsaw-(Poland)

Fundamentals of Mechanical Technology

2025-06-16 2025-06-20
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Marbella (Spain) Marbella-(Spain)

Fundamentals of Mechanical Technology

2025-06-16 2025-06-20
Class Room 5450 €
training course in Fundamentals of Mechanical Technology held in in the city of Bucharest (Romania) Bucharest-(Romania)

Fundamentals of Mechanical Technology

2025-06-16 2025-06-20
Class Room 5450 €
training course in Fundamentals of Mechanical Technology held in in the city of Bangkok (Thailand) Bangkok-(Thailand)

Fundamentals of Mechanical Technology

2025-06-16 2025-06-20
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Dublin (Ireland) Dublin-(Ireland)

Fundamentals of Mechanical Technology

2025-06-30 2025-07-04
Class Room 3950 €
training course in Fundamentals of Mechanical Technology held in in the city of DUBAI (UAE) DUBAI-(UAE)

Fundamentals of Mechanical Technology

2025-07-06 2025-07-10
Class Room 3450 €
training course in Fundamentals of Mechanical Technology held in in the city of Sharm ElShaikh (Egypt) Sharm-ElShaikh-(Egypt)

Fundamentals of Mechanical Technology

2025-07-21 2025-07-25
Class Room 5450 €
training course in Fundamentals of Mechanical Technology held in in the city of Yerevan (Armenia) Yerevan-(Armenia)

Fundamentals of Mechanical Technology

2025-08-04 2025-08-08
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Copenhagen (Denmark) Copenhagen-(Denmark)

Fundamentals of Mechanical Technology

2025-08-11 2025-08-15
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Amsterdam (Netherlands) Amsterdam-(Netherlands)

Fundamentals of Mechanical Technology

2025-08-25 2025-08-29
Class Room 4950 €
training course in Fundamentals of Mechanical Technology held in in the city of Kuala Lumpur (Malaysia) Kuala-Lumpur-(Malaysia)

Fundamentals of Mechanical Technology

2025-08-25 2025-08-29
Class Room 6450 €
training course in Fundamentals of Mechanical Technology held in in the city of Singapore (Singapore) Singapore-(Singapore)

Fundamentals of Mechanical Technology

2025-08-31 2025-09-04
Class Room 3950 €
training course in Fundamentals of Mechanical Technology held in in the city of Kuwait (Kuwait) Kuwait-(Kuwait)

Fundamentals of Mechanical Technology

2025-09-08 2025-09-12
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Barcelona (Spain) Barcelona-(Spain)

Fundamentals of Mechanical Technology

2025-09-08 2025-09-12
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Madrid (Spain) Madrid-(Spain)

Fundamentals of Mechanical Technology

2025-09-15 2025-09-19
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Zurich (Switzerland) Zurich-(Switzerland)

Fundamentals of Mechanical Technology

2025-09-15 2025-09-19
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Geneva (Switzerland) Geneva-(Switzerland)

Fundamentals of Mechanical Technology

2025-09-15 2025-09-19
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Auckland (New Zealand) Auckland-(New-Zealand)

Fundamentals of Mechanical Technology

2025-09-15 2025-09-19
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Frankfurt (Germany) Frankfurt-(Germany)

Fundamentals of Mechanical Technology

2025-10-05 2025-10-09
Class Room 3450 €
training course in Fundamentals of Mechanical Technology held in in the city of Manama (Bahrain) Manama-(Bahrain)

Fundamentals of Mechanical Technology

2025-10-06 2025-10-10
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Vienna (Austria) Vienna-(Austria)

Fundamentals of Mechanical Technology

2025-10-12 2025-10-16
Class Room 3950 €
training course in Fundamentals of Mechanical Technology held in in the city of Doha (Qatar) Doha-(Qatar)

Fundamentals of Mechanical Technology

2025-10-19 2025-10-23
Class Room 3050 €
training course in Fundamentals of Mechanical Technology held in in the city of Cairo (Egypt) Cairo-(Egypt)

Fundamentals of Mechanical Technology

2025-11-03 2025-11-07
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Berlin (Germany) Berlin-(Germany)

Fundamentals of Mechanical Technology

2025-11-10 2025-11-14
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Florence (Italy) Florence-(Italy)

Fundamentals of Mechanical Technology

2025-11-23 2025-11-27
Class Room 3950 €
training course in Fundamentals of Mechanical Technology held in in the city of Muscat (Oman) Muscat-(Oman)

Fundamentals of Mechanical Technology

2025-11-23 2025-11-27
Class Room 3950 €
training course in Fundamentals of Mechanical Technology held in in the city of Casablanca (Morocco) Casablanca-(Morocco)

Fundamentals of Mechanical Technology

2025-12-08 2025-12-12
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Hamburg (Germany) Hamburg-(Germany)

Fundamentals of Mechanical Technology

2025-12-15 2025-12-19
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of London (UK) London-(UK)

Fundamentals of Mechanical Technology

2025-12-22 2025-12-26
Class Room 4950 €
training course in Fundamentals of Mechanical Technology held in in the city of Trabzon (Turkey) Trabzon-(Turkey)

Fundamentals of Mechanical Technology

2025-12-22 2025-12-26
Online 2250 €
training course in Fundamentals of Mechanical Technology held in in the city of ONLINE ONLINE

Fundamentals of Mechanical Technology

2025-12-22 2025-12-26
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Malaga (Spain) Malaga-(Spain)

Fundamentals of Mechanical Technology

2025-12-29 2026-01-02
Class Room 5950 €
training course in Fundamentals of Mechanical Technology held in in the city of Cyprus (Larnaka) Cyprus-(Larnaka)

Fundamentals of Mechanical Technology

2025-12-29 2026-01-02
Class Room 4450 €
training course in Fundamentals of Mechanical Technology held in in the city of Jakarta (Indonesia) Jakarta-(Indonesia)

Other courses from the same category

Registration Form

Inquiry Form

A tailored course application form

Brochure Request Form

Send to a Friend

Sample contact me back

Group Offer Form

Training Institute

Scandinavian Academy for Training and Development AB

Training services provider in the Kingdom of Sweden
Registration number :  559173 - 7431

VAT No : SE559173743101
LEI : 894500PURESQ3KN5AJ74

Copyright © 2024- All Rights Reserved to the Scandinavian Academy for Training and Development AB